Sony MVS-8000 User Manual page 339

5
To cancel an assignment
Select the button, then press [Clear].
This leaves nothing assigned.
To return all preview selection button assignments to the factory
default state
In the Fade To Black Module menu, press [Default].
Assigning devices or functions to the device selection buttons
and other buttons of the device control block (search dial)
You can assign devices and functions to the device selection buttons, SBOX
buttons and [DELAY] button of the device control block (search dial).
For details of the device control block (search dial), see Chapter 2 (Volume 1).
1
2
3
4
5
338
Setup Relating to Operations From the Control Panel
Press [Set].
This assigns the signal selected in the list to the button.
In the Panel >Config menu, press [Link/Program Button].
The Link/Program Button menu appears.
Press [Device Control Module].
The Device Control Module menu appears.
The left of the status area shows the device selection buttons, SBOX
buttons and [DELAY] button of the device control block (search dial). The
list on the right shows the devices and functions that can be assigned.
In the button displays on the left, press the button for the assignment.
Using any of the following methods, select the device or function to be
assigned.
• Press directly on the list on the right.
• In the list on the right, press the arrow keys to scroll the reverse video
cursor.
• Turn the knob.
Knob Parameter
1 Device
Function
Press [Set].
This assigns the device or function selected in the list to the button.
Adjustment
Selection of device or
function to be assigned
Setting values
1 and upwards