Sony MVS-8000 User Manual page 55

Applying modulation to the wipe crop pattern (Modulation)
1
2
Replicating the wipe crop pattern (Multi)
1
2
54
DME Special Effect Operations
• When Angle is selected
Knob Parameter Adjustment
1 Angle Angle of pattern rotation
a) –1.00 represents a whole turn counterclockwise, and +1.00 represents a whole turn
clockwise. 0.00 is the original state.
• When Speed is selected
Knob Parameter Adjustment
1 Speed Rotation rate of pattern
a) –100.00 represents a speed of four whole turns counterclockwise per second, and +100.00
represents a speed of four whole turns clockwise per second. 0.00 is the stationary state.
In the <Modulation> group of the Wipe Crop menu, select one of the
following.
H (horizontal modulation): Modulate the pattern to apply waving in the
horizontal direction.
V (vertical modulation): Modulate the pattern to apply waving in the
vertical direction.
Set the following parameters.
Knob Parameter Adjustment
1 Amplitude Amplitude of modulation
2 Frequency Frequency of modulation
3 Speed Speed of waves
In the Wipe Crop menu, press [Multi], turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 H Multi Number of repetitions of
pattern horizontally
2 V Multi Number of repetitions of
pattern vertically
Setting values
a)
–8.00 to +8.00
Setting values
a)
–100.00 to +100.00
Setting values
0.00 to 100.00
0.00 to 100.00
–100.00 to +100.00
Setting values
1 to 63
1 to 63