Sony MVS-8000 User Manual page 310

• Turn the knob.
4
Press [Texture Package].
Note
If you select a device for which the spotlighting license is not enabled, then
[Texture Package] is not enabled.
The Texture Package menu appears.
For details of the Texture Package menu, see page 306.
5
In the texture number list, select the number for which you want to register
the texture package, by any of the following methods.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 Texture No
6
In the texture file list, select the texture file by any of the following
methods.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
2 No
a) The range of the setting values depends on the number of saved files on a memory card.
7
In the <Texture Pattern> group, press [Select].
This assigns the texture file selected in step 6 to the number selected in step
5, and updates the texture number list.
The grid display of memory capacity shows the location where the texture
files are stored in memory by bold frames. The grid portion for the texture
file selected in the texture number list is shown in amber.
8
Repeat steps 5 to 7, to assign all of the texture files to texture packages.
Notes
• If you assign a texture file that is already in the texture number list to a
different texture number, then the previous assignment is deleted. (It is
Adjustment
Texture number selection
Adjustment
Texture file selection
Setting values
101 to 164
Setting values
a)
1 and upwards
Setup for the Whole System
309