Error Messages Shown In The Error Information Menu - Sony MVS-8000 User Manual

With ccp-8000 series center control panel
Hide thumbs Also See for MVS-8000:
Table of Contents

Advertisement

Icon
Title
Message
Set Time/
Error: Wrong Format.
Date
Warning
No Switcher information
available.
Please confirm "Network
Configuration" on Page 7311.
Warning
This operation will be
cancelled, because the register
is locked.
Please change the register
status to be unlocked first.
Warning
Illegal Network Config
(System
Information (Page 7311)
Config)
Illegal Panel Assign
Information for Dual Simul
Operation (Page 7312)
No Panel Assign Information
(Page 7312)
No Switcher Assign
Information (Page 7312)
No System Operation Mode
Information (Page 7312)
No DME Channel Information
a) MKS-8010A only

Error Messages Shown in the Error Information Menu

If a file transfer related error occurs, the Error Information menu appears to the
following error messages.
Error messages displayed when an error is detected by the
switcher processor
The following messages (except message a)) indicate data error; load or save
the data again. If the message still appears, contact your Sony service
representative.
Description
7317: Engineering Setup >System
>Maintenance
In the above menu, an incorrect date and time
was specified. Specify the date and time
correctly.
When starting up the menu system, the
switcher is not present in the system
information. Check the Data LAN connections,
and in the 7311:Engineering Setup >System
>Network Config menu, retry [Auto Config].
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store
>Edit
6411.1: Shotbox >Register >Store>Edit
In the above menus, an attempt was made to
store in a locked register. Unlock the register
before carrying out the store.
When starting up the menu system, if the
system information read from the control panel
is not correct, one of these messages, that
corresponds to the situation appears.
Following the message, use 7311:Engineering
Setup >System >Network Config or
7312:Engineering Setup >System >System
Config to retry the operation.
637
Error Messages

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mvs-8000sf

Table of Contents