Mosaic Settings - Sony MVS-8000 User Manual

Masking the Contrast effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see "Mask Settings" (page 76).
Note
The Mask function is not supported on the MVE-8000.

Mosaic Settings

This effect divides the image into small tiles so that it looks like a mosaic.
For an illustrative figure and other information, see "DME Special Effects" in
Chapter 1 (Volume 1).
Applying the Mosaic effect
1
2
3
68
DME Special Effect Operations
Video output level
Clip
In the DME menu, select VF2 'Video Modify' and HF4 'Mosaic.'
The Mosaic menu appears.
Press [Mosaic], turning it on.
The Mosaic effect is enabled. You can adjust the size and aspect ratio of
the mosaic tiles with the knobs.
Set the following parameters.
Knob Parameter
1 Size
Video output level
Gain
Video input
level
Clip, Gain, Offset
Adjustment
Size of tiles
Offset
Video input
level
Setting values
0.00 to 100.00