Sony MVS-8000 User Manual page 639

Messages relating
to loading
PUT CLOSE (0x1)
PUT CLOSE (0x2)
PUT CLOSE (0x3)
PUT CLOSE (0x4)
PUT CLOSE (0x5)
PUT CLOSE (0x6)
PUT CLOSE (0x7)
PUT CLOSE (0x8)
PUT CLOSE (0x9)
PUT CLOSE (0xA)
PUT CLOSE (0xB)
PUT CLOSE (0xC)
a) This occurs if the User Region Config state is different for save and load. Make the User Region
Error messages when an error is detected displayed by the
control panel
When one of the following messages (except messages a) and b)) appears, load
or save the data again. If the message still appears, contact your Sony service
representative.
Message
ERROR: NOT SUPPORTED
ERROR: DESTINATION NG
ERROR: OUT OF MEMORY
ERROR: ILLEGAL BLOCK ID
ERROR: CANNOT PROCESS
ERROR: CLF CHECK SUM ERROR
ERROR: SEQUENCE ERROR
ERROR: OUT OF BUFFER
ERROR: PACKET FORMAT NG
ERROR: UPLOAD DATA SIZE OVER
ERROR: CANNOT CREATE HEADER
ERROR: INVALID REG NO
ERROR: DOWNLOAD FILE SIZE OVER
ERROR: INVALID VERSION
638
Error Messages
Messages relating
to saving
GET OPEN (0x1)
GET OPEN (0x2)
GET OPEN (0x3)
GET OPEN (0x4)
GET OPEN (0x5)
GET OPEN (0x6)
GET OPEN (0x7)
GET OPEN (0x8)
GET OPEN (0x9)
GET OPEN (0xA)
a)
GET OPEN (0xB)
GET OPEN (0xC)
Config the same as when the data was saved before carrying out a load operation.
a)
a)