Sony MVS-8000 User Manual page 392

Knob
2
4
To enable through mode, press [Through Mode], turning it on.
Making video process settings
1
In the Switcher >Input menu, press [Video Process].
The Video Process menu appears.
The status area shows the source number, source name, and video process
adjustment settings.
2
Using any of the following methods, select the input signal to which the
settings apply.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
3
Press [Video Process], turning it on.
4
Adjust the following parameters.
Knob
1
2
3
4
5
To set the parameter settings to their defaults, press [Unity].
Enabling the illegal color limiter
To enable the illegal color limiter for the signals generated by the switcher
internal matte generator, press [Matte Illeg Col Limit] in the Switcher >Input
menu, turning it on.
Parameter Adjustment
Phase Input signal phase
Parameter Adjustment
Src No Input signal selection
Parameter Adjustment
Video Gain Video signal gain
Y Gain Y signal gain
C Gain Chrominance signal gain
Hue Delay Hue delay
Black Level Black level
Setting values
–16 to +16
Setting values
1 to 80
Setting values
–200.00 to +200.00
–200.00 to +200.00
–200.00 to +200.00
–180.00 to +180.00
–7.31 to +109.59
Setup Relating to Switcher Processor
391