Sony MVS-8000 User Manual page 640

Message
ERROR: INVALID FORMAT
ERROR: INVALID MODEL
ERROR: INVALID CATEGORY
ERROR: WRONG FILE SIZE
ERROR: UNCOMPRESS ERROR
ERROR: CHECK SUM ERROR
ERROR: BROKEN DATA
ERROR: LOCK REGISTER
a) This occurs if a problem in the data makes normal load or save operation impossible. Either
create the register data again, or resave.
b) This appears if an attempt is made to load from a locked register. Release the lock, and repeat
the load.
Error messages displayed by the DME processor
When one of the following messages (except message a)) appears, load or save
the data again. If the message still appears, contact your Sony service
representative.
Message
<filename>:ERROR:File size is zero
<filename>:ERROR:Not complete
<filename>:ERROR:Timeout
<filename>:ERROR:UnKnown
<filename>:ERROR:Can't Rename
<filename>:ERROR:Can't Copy
<filename>:ERROR:Busy, try later
a) Even if operation such as batch deletion of snapshot or effect registers appears from the menu
to have completed, if internal processing is still being carried out when an attempt is made to
carry out another operation, then this message appears. Wait a short time, then retry.
Error messages displayed when an error is detected by the menu
CPU
When one of the following messages (except messages a) to d)) appears, load
or save the data again. If the message still appears, contact your Sony service
representative.
Message
ERROR: CONNECT ERROR
ERROR: GET CONF FILE
a)
a)
b)
a)
639
Error Messages