Sony MVS-8000 User Manual page 176

Press the [SET DUR] button in the device control block (search dial). The
display in the numeric keypad control block shows "DUR" and the current
setting. Enter the desired duration from the numeric keypad control block,
and press [ENTER].
For details of timecode entry, see "Setting the start point and stop point
with the [SET XX] buttons" (page 176).
• Setting with the Cueup & Play menu:
For details of settings in the Cueup & Play menu, see "Setting the start
point, stop point, and start delay time in a menu" (page 177).
9
To set a start delay time, press the [DELAY] button in the device control
block, and enter a value in the numeric keypad control block.
Alternatively, make the setting in the Device >DDR/VTR >Cueup & Play
menu.
If no setting is required, continue to step 11.
For details of settings in the Cueup & Play menu, see "Setting the start
point, stop point, and start delay time in a menu" (page 177).
10
Press the [STORE] button, turning it on, in the numeric keypad control
block.
11
Enter the number of the register in which to save the settings.
When overwriting the settings in the register recalled in step 3, continue to
step 12 without changing the displayed register number.
12
Press the [ENTER] button.
This saves the settings in the register.
Automatically cueing up and playing VTR/Extended VTR/disk
recorder
By recalling a register in which you have saved setting data for Cueup & Play,
you can control the VTR/Extended VTR/disk recorder automatically in the
same way as when automatically executing a keyframe effect.
1
In the numeric keypad control block, press the [EFF] button, turning it on.
The [RCALL] button in the numeric keypad control block lights.
2
With the region selection buttons in the numeric keypad control block,
select the region.
You can select more than one button.
Control of VTRs, Extended VTRs, and Disk Recorders
175