Sony MVS-8000 User Manual page 131

2
3
4
5
130
DME Special Effect Operations
Press [Light 1], turning it on.
This enables the Light 1 light source, and you can now use the knobs to
adjust the parameters.
Set the following parameters.
Knob Parameter Adjustment
1 Total Brightness of whole image
Ambient
2 Intensity Intensity (brightness) of the light
source
3 Soft Softness of the lighted area
• Lowering the brightness of the image makes Spotlighting more
effective.
• The Total Ambient setting is shared with the Lighting function.
In the <Spot Mode> group, select the type of light source.
Parallel: Parallel light source. The direction can be set.
Point: Point light source. The position can be set.
Line: Line light source. The position and angle can be set.
Whole: Non-directional light source which illuminates the whole image
(no settings).
For more information about light source types, see "Digital Multi Effects
(DME)" in Chapter 1 (Volume 1).
According to the selected light source type, set the following parameters.
When you selected Parallel
Knob Parameter Adjustment
1 Longitude Longitude
2 Latitude Latitude
a) Minus moves counterclockwise, plus moves clockwise.
When you selected Point
• SD format
Knob Parameter Adjustment
1 X Movement in X-axis direction
2 Y Movement in Y-axis direction
3 Z Movement in Z-axis direction
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
Setting values
a)
–8.00 to +8.00
–8.00 to +8.00
Setting values
a)
–6.00 to +6.00
b)
–6.00 to +6.00
c)
–6.00 to +6.00