Sony MVS-8000 User Manual page 341

To cancel an assignment
Select the button, then press [Clear].
This removes the assignment to that button.
To return all device selection button assignments to the factory
default state
In the Joystick/Trackball Module menu, press [Default].
Inhibiting utility 2 bus and key operations
You can inhibit operations on the utility 2 bus and keys 1 to 4 of the M/E and
P/P banks by menu operations.
This inhibitions apply for the following control blocks.
• Cross-point control block
• Transition control block
• Independent key transition control block
1) Only when the Key1, 2 or Key 3, 4 are assigned by the Compact Key Module Assign menu.
Note
In the AUX bus control block and other control blocks which are excluded
from M/E and P/P banks, the operations on the utility 2 bus and keys 1 to 4 are
not inhibited.
1
2
3
340
Setup Relating to Operations From the Control Panel
In the Panel >Config menu, press [M/E Operation Inhibit].
M/E Operation Inhibit menu appears.
In the list in the status area, using any of the following methods, select the
switcher bank for which operations are to be inhibited.
• Press directly on the desired switcher bank in the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 Bank
In the <M/E Operation Inhibit> group, press the utility 2 bus or key button
([Util2 Bus] or [Key1] to [Key4]) for which operations are to be inhibited.
1)
Adjustment
Switcher bank selection for
inhibiting operations
Setting values
1 to 4