Setup Relating To Operations From The Control Panel; Overall Control Panel Settings (Config Menu) - Sony MVS-8000 User Manual

With ccp-8000 series center control panel

Hide thumbs Also See for MVS-8000:

Table of Contents

Setup Relating to Operations From the

Control Panel

To carry out the overall control panel settings, use the Panel >Config menu.

To display the Config menu

In the Engineering Setup menu, select VF2 'Panel' and HF1 'Config.'

The status area shows the "Bank numbers 1 to 4" (physical locations) of the M/

E and PGM/PST banks, the allocated bank names, and whether or not operation

Interchanging the bank order or disabling operation

In the Panel >Config menu, select the Bank you want to set, using any of

the following methods.

• Press directly on the status area display.

• Press the arrow keys to scroll the reverse video cursor.

• Turn the knob.

The Bank selection here indicates the physical position on the control

panel, numbering from the top as the 1st Row, 2nd Row, 3rd Row, and 4th

Select the bank that you want to assign to the selected Bank number in the

<M/E Assign> group.

The status area shows the interchanged state of the banks.

• It is not possible to assign the same M/E logical bank to more than one

physical bank. Be sure to make different M/E assignments.

• When the bank order is changed, the state of region selection button

assignment in the numeric keypad control block also changes

correspondingly.

Select the position of the bank you want

Setup Relating to Operations From the Control Panel

Setting values

Show Quick Links

Table of Contents