Download  Print this page

Sony CCP-9000A-C Operation Manual

Center control panel pack. 1 m/e control panel. 2 m/e control panel..
Hide thumbs


1st Edition


Table of Contents

   Related Manuals for Sony CCP-9000A-C

   Summary of Contents for Sony CCP-9000A-C

  • Page 1 CENTER CONTROL PANEL PACK CCP-9000A-C 1 M/E CONTROL PANEL MKS-9011A 2 M/E CONTROL PANEL MKS-9012A MKS-8011 MKS-8031TB MKS-8032 MKS-8033 MKS-8035 MKS-8041 MKS-8075 HK-PSU11 OPERATION MANUAL [English] 1st Edition...
  • Page 2 user will be required to correct the interference at his own WARNING expense. To prevent fire or shock hazard, do not You are cautioned that any changes or modifications not expose the unit to rain or moisture. expressly approved in this manual could void your authority to operate this equipment.
  • Page 3 WARNING: THIS WARNING IS APPLICABLE FOR OTHER abzuziehen, damit die Stromversorgung zum Gerät COUNTRIES. unterbrochen wird. 1. Use the approved Power Cord (3-core mains lead)/ Appliance Connector/Plug with earthing-contacts that conforms to the safely regulations of each country if AVERTISSEMENT applicable.
  • Page 4 • EN55103-2: Elektromagnetische Empfindlichkeit To guarantee safe long-term operation, periodic inspections (Immunität) are recommended. Please contact your Sony representative Dieses Produkt ist für den Einsatz unter die folgende for detailed information about the content and cost of periodic elektromagnetische Bedingung ausgelegt: E4 (kontrollierter inspections.
  • Page 5: Table Of Contents

    Table of Contents Overview ................6 Features..................6 Units and Modules..............6 Optional Accessories ..............7 Location and Function of Parts........... 8 MKS-9011A/9012A Front Panel ..........8 MKS-9011A/9012A Rear Panel ..........9 MKS-8011 Menu Panel ............11 MKS-8075 Extension Adaptor ..........11 Example System Configuration ........12 MVS-8000A System Configuration ........
  • Page 6: Overview

    Powerful external device control Overview The center control panel can control devices such as Sony routing switchers and IF processors. Control of devices such as VTRs and DDRs can be linked to timelines of switchers and DME. Overview The CCP-9000A-C Center Control Panel Pack...
  • Page 7: Optional Accessories

    HK-PSU11 Power Supply Unit A backup power supply unit for the MKS-9011A/9012A. The MKS-9011A/9012A is equipped with 1 power supply unit as standard equipment. Installation of this option brings the number of power supply units to 2, allowing normal operation even if one of the power supply units fails.
  • Page 8: Location And Function Of Parts

    • If the status indicators do not light even though the AC power cord is connected, there may be failure in the unit. Disconnect the AC power cord and contact a Sony service or marketing representative. b “Momory stick” status indicator Data is being read from or written to a “Memory Stick”...
  • Page 9: Mks-9011a/9012a Rear Panel

    * For information about Ethernet switches that can be used in an MVS c PERIPH (peripheral) connector (RJ-45) system, contact your Sony service representative. * Ethernet is a trademark of XEROX Corporation. Connect to the DCU-8000 Device Control Unit Pack with...
  • Page 10 l DATA connector (RJ-45) For detailed information about setting up the Ethernet switch, refer to the documentation supplied with the Connect to an Ethernet switch. Ethernet switch. The MVS-8000A/DVS-9000 Switcher Processor Pack, the MVE-8000A DME Processor Pack and other devices can e REMOTE connector (BNC type) be connected in the same way to the Ethernet switch to Connect this connector with a BNC cable to an S-BUS data...
  • Page 11: Mks-8011 Menu Panel

    MKS-8011 Menu Panel SCU connector SCU connector (D-sub 50-pin, special interface) Connect to the MENU PANEL connector of the MKS- 8010/9011A/9012A System Control Unit. MKS-8075 Extension Adaptor 1SCU IN connector 2SCU OUT connector a SCU IN (system control unit input) connector (D-sub 50-pin, special interface) Connect to one of the EXT PANEL connector of the MKS- 8010/9011A/9012A System Control Unit or to the SCU...
  • Page 12: Example System Configuration

    Example System Configuration MVS-8000A System Configuration Reference video signal MVE-8000A DME Processor Pack Ethernet switch Ethernet switch DATA CTRL REMOTE BVE-9100 Editing Control System CTRL DATA CTRL REMOTE MKS-9011A/9012A Control Panel DATA REMOTE PERIPH Reference video signal MVS-8000ASF Switcher Processor Reference Pack video signal...
  • Page 13: Center Control Panel Connection

    Module name Max. modules cables supplied in the package, or SWC-5002/5005/5010 MKS-8031TB Track Ball Module cables. MKS-8033 Utility/Shotbox Module MKS-8035 Key Control Module MKS-8032 DSK Fader Module Contact your Sony service representative for more information about connectable devices. Example System Configuration...
  • Page 14: Exchanging Button Labels

    Exchanging Button Adjusting Fader Torque Labels You can adjust faders without removing them from the center control panel or operation modules. A button top puller is supplied with the center control panel. Proceed as follows to adjust faders. After changing a pattern assigned to a numeric button, you can use the following procedure to exchange the button label.
  • Page 15: Power Supply Unit Status Indicators

    Power Supply Unit Status Maintenance Indicators Clean the menu display screen (touch screen) with a soft cloth lightly moistened with ethanol. The power supply unit status indicators show the status of Be sure to wipe only the dirty places lightly, taking care the power supply unit during operation and when the unit not to spread the dirt.
  • Page 16: About "memory Sticks

    • “Memory Stick” (with memory select About “Memory Sticks” function) Equipped with the multiple memories (128 MB). You can select the memory to use with the memory selects switch on the back of the “Memory Stick”. You cannot use What Are “Memory Sticks”? different memories simultaneously or continuously.
  • Page 17: Before Using A "memory Stick

    • To prevent data loss, make backups of data frequently. In labeling position. no event will Sony be liable for any loss of data. • Do not write forcefully on the “Memory Stick Duo” • Unauthorized recording may be contrary to the memo area.
  • Page 18: Specifications

    Operating humidity Specifications 10% to 90% Dimensions (w/h/d) 440×175×385.3 mm (17 ×7×15 inches) The following specifications show the reference Mass Approx. 10 kg (22 lb) performance for this unit and individual option boards/ “Memory Stick” slot modules. “Memory Stick” (8 MB to 128 MB) Design and specifications are subject to change without Reference input notice.
  • Page 19: Mks-9012a 2 M/e Control Panel

    AC power cord (for Europe only) (250 V 10 A 2.4 m (8 ft)) Data transfer rate: 312/1250 Kbps (Part No.: 1-782-929-22) D-sub 25-pin, female TTL inputs: 8 Relay contact outputs: 4 (30 V AC/DC, MKS-9012A 2 M/E Control Panel 0.1 A) Open collector outputs: 4 LTC IN...
  • Page 20: Mks-8031tb Track Ball Module

    MKS-8031TB Track Ball Module MKS-8041 Blank Panel (1/2) Power requirements Power requirements 12 V DC 12 V DC Power consumption Power consumption Max. 1 A Max. 0.1 A Dimensions (w/d, excluding projections) Dimensions (w/d, excluding projections) 220×132 mm (8 ×5 inches) 220×132 mm (8 ×5...
  • Page 21 Accessories supplied Installation Guide (1) (supplied only when product is purchased separately) Specifications...
  • Page 22 Specifications...
  • Page 23 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...
  • Page 24 Sony Corporation B & P Company CCP-9000A-C Printed in Japan (SY) 2004.08.13 3-857-386-01 (1) © 2002 Printed on 100% recycled paper...

Comments to this Manuals

Symbols: 0
Latest comments: