Sony MVS-8000 User Manual page 319

3
4
5
6
7
318
Setup for the Whole System
The status area shows a list of menu numbers and menu names in the
selected group.
Subsequent lock operations apply within the group selected here.
Using any of the following methods, select the menu or the set of menus
as candidates for the locking operation.
• Press directly on the list in the status area.
• Use the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter Adjustment
1 No Selection of a menu by its number
in the list
3 Num Selection of number of menus in
the list
• To select all setup menus within the selected group, press [ALL].
You can also select a menu while it is open. For details, see "To select an
opened setup menu for locking" (page 319).
Press [Lock Item Select].
This makes the selected menus candidates for locking, and a padlock icon
appears in the "Lock" box (in the unlocked state)
Note
If there are already one or more locked menus, selection of lock candidates
is not possible.
To deselect a lock candidate
After selecting a menu, press [Lock Item Select] once more, to clear the
Lock box.
To deselect all lock candidates in the selected VF group
Press [Lock Item All Clear].
Repeat steps 2 to 4, to select all of the lock candidates.
Press [Lock].
A keyboard window appears.
Enter the password with a maximum of 16 characters, and press [Enter].
If the password is correct, the menus selected in the list of candidates are
all locked. The padlock icon changes to the locked state
Setting values
1 and upwards
1 and upwards
.
.