Defocus Settings - Sony MVS-8000 User Manual

Adjusting the color 1 and color 2
1
2
Modifying the color combination pattern
See the following pages.
• "Setting the aspect ratio of the wipe crop pattern (Aspect)" (page 53)
• "Replicating the wipe crop pattern (Multi)" (page 54)
• "Rotating the wipe crop pattern (Rotation)" (page 53)
• "Applying modulation to the wipe crop pattern (Modulation)" (page 54)

Defocus Settings

This effect defocuses the entire image.
For an illustrative figure and other information, see "DME Special Effects" in
Chapter 1 (Volume 1).
Applying the Defocus effect
1
2
58
DME Special Effect Operations
In the Color Mix menu, to adjust color 1 press [Color1], and to adjust color
2 press [Color2].
Set the following parameters.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
In the DME menu, select VF2 'Video Modify' and HF1 'Defocus/Blur.'
The Defocus/Blur menu appears.
Press [Defocus], turning it on.
The Defocus effect is enabled. You can adjust the defocusing of video and
key signals with the knobs.
Note
On the MVE-8000A, the Defocus and Glow effects cannot be enabled at
the same time. The effect which was turned on most recently is enabled.
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00