Sony MVS-8000 User Manual page 532

1
Recall the macro register you want to assign to the button.
For details of recall from the numeric keypad control block, see page 494,
and for details of recall from the Flexi Pad control block, see page 504.
2
Press the button to which [MCRO ONLY SET] is assigned, turning it on.
3
Hold down the cross-point control block [PRE MCRO] button or [POST
MCRO] button, and press the desired button in the background A row.
The cross-point button you pressed flashes green, and the register you
recalled in step 1 is assigned to the button. The [MCRO ONLY SET]
button goes off.
Without switching to macro only mode in step 2, if you hold down the
[PRE MCRO] and [POST MCRO] buttons together and press the desired
button, it is possible to set a macro attachment in macro only mode for that
button.
To check macro attachment settings
Hold down the [PRE MCRO] button or [POST MCRO] button. While it is held
down, buttons for which macro attachments are set flash as follows.
While the [PRE MCRO] button is held down:
• Buttons set in pre macro mode: flash amber
• Buttons set in macro only mode: flash green
While the [POST MCRO] button is held down:
• Buttons set in post macro mode: flash amber
• Buttons set in macro only mode: flash green
Setting a macro attachment to a fader lever
You can set a macro attachment to any particular position of a fader lever in the
transition control block.
Notes
• In macro only mode it is not possible to set a macro attachment.
• It is not possible to set a macro attachment to a fader lever in the keyframe
control block or downstream key control block.
• For a split fader, you can set a macro attachment to the main split fader.
For details of split faders, see Chapter 3, "Split Fader" (Volume 1).
1
Recall the macro register that you want to assign to the fader lever.
For details of recall from the numeric keypad control block see page 494,
and for recall from the Flexi Pad control block see pages 504 and 512.
Macro Attachment Assigning
531