Sony MVS-8000 User Manual page 184

start point, stop point, variable speed, and file name (for a disk recorder or
Extended VTR).
2
Using any of the following methods, select the device for which you want
to set the action.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 Dev
3
To set the name of a file when using an Extended VTR or disk recorder,
recall the file using the Device >DDR/VTR >File List menu.
For details of settings required to recall a file, see "Sharing disk recorder/
Extended VTR file lists" (page 373).
Note
There is a limit of eight disk recorder files that can set on a single timeline.
If you have not set the file name when using an Extended VTR, the file
recalled in the Extended VTR when the keyframe point is passed is the
subject of the action.
When not using an Extended VTR or disk recorder, or when the file name
has not been set for an Extended VTR, skip to step 4.
4
In the <Action> group, select the action.
Cueup: Output a command to cue up to the currently displayed start point.
Start: Output a Play command.
Note
When the stop point and variable speed are both set, the variable speed
setting takes priority.
Stop: Output a Stop command.
Note
Before executing the Stop command, if the timecode for the set stop
point has been reached, or on an Extended VTR or disk recorder if the
end of the file has been reached, then at that point the device stops.
5
To set a start point, in the <Start TC> group, press the [Set] button.
A timecode window appears.
Setting
Device number
Control of VTRs, Extended VTRs, and Disk Recorders
Setting values
1 to 12
183