Executing A Macro By Macro Attachment - Sony MVS-8000 User Manual

Scrolling the list
To scroll the macro attachment list, do one of the following.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1

Executing a Macro by Macro Attachment

Note
For execution on any of the M/E and PGM/PST banks, use the [MCRO
ATTCH ENBL] button in the cross-point control block. To execute a macro
according to a macro attachment set elsewhere, assign "MCRO ATTCH
ENBL" to a utility/shotbox control block or user preference button, then use
that button.
Executing a macro assigned to a button
1
2
Notes
• It is not possible to execute more than one macro at a time. Therefore, even
• During macro execution, recalling the same register again stops the macro
534
Macro Attachment Assigning
Parameter Adjustment
No Macro attachment settings scrolling
Depending on the location of the button you want to use, press the [MCRO
ATTCH ENBL] button, turning it on.
Press the desired button for which a macro attachment has been set.
This recalls the macro register assigned to the button, and the macro is
executed as follows, according to the operation mode.
Pre macro mode: The macro is executed first, and then the button
function is executed.
Post macro mode: The button function is executed first, and then the
macro is executed.
Macro only mode: The button function is not executed, and the macro
only is executed.
During macro execution, the button you pressed flashes.
if you simultaneously press multiple buttons for which macro attachments
are set, only one macro is executed.
being executed. Therefore, pressing twice a button for which a macro
attachment is set stops the macro being executed.
Setting values
1 and upwards