Cueup & Play - Sony MVS-8000 User Manual

Current: Shows timecode for current device position.
Start TC: Shows timecode for start point set on device.
Stop TC: Shows timecode for stop point set on device.
Variable: Shows the variable speed set for each device.
Delay: Shows start delay time set on device.
Mode: Shows operation mode (Loop or Recue) set for the device (only when
Cueup & Play
Using the device control block or Device menu, you can carry out Cueup &
Play settings (VTR or disk recorder start point, stop point, start delay time, and
so on), and save the settings in an effect register. By recalling this register, you
can carry out automatic control of the VTR, Extended VTR, or disk recorder.
Notes
• In an effect register set on the VTR/disk recorder timeline, Cueup & Play
• When using a disk recorder with Cueup & Play, if you carry out the
172
Control of VTRs, Extended VTRs, and Disk Recorders
Operating When VTR, Extended VTR, or
status display Sony disk 9-pin protocol is
used
FF Fast forwarding.
Rewind Rewinding.
Shtl> Playing in the forward direction
in shuttle mode.
Shtl< Playing in the reverse direction
in shuttle mode.
Var> Playing in the forward direction
in "variable" mode.
Var< Playing in the reverse direction
in "variable" mode.
Jog> Playing in the forward direction
in jog mode.
Jog< Playing in the reverse direction
in jog mode.
Still Playing still image.
the EVS XT server is operated with video disk communications protocol).
settings are not possible. To add Cueup & Play settings to such a register,
first clear the VTR/disk recorder timeline setting before carrying out the
operation.
following sequence of operations, the system may freeze on the frame of the
start point.
1. Press the [RUN] button to play to a point close to the end of a file.
When video disk
communications protocol is
used
—
—
—
—
Playing in the forward direction
in "variable" mode.
Playing in the reverse direction
in "variable" mode.
Playing in the forward direction
in jog mode.
Playing in the reverse direction
in jog mode.
—