Sony MVS-8000 User Manual page 403

5
Setting the reference output
Note
This function is not supported on the MVS-8000G.
To adjust the reference output phase with respect to the reference input, adjust
the following parameters in the Switcher >Output menu.
Knob
2
3
Cropping the image to a 4:3 aspect ratio in an HD system
In an HD system, to crop an image having a screen aspect ratio of 4:3 to an
aspect ratio of 4:3, use the following procedure.
1
2
Note
When the screen aspect ratio of 16:9 is selected for all M/E banks in the System
>Format >Active Line/Aspect menu, the setting of 4:3 Crop is disabled.
402
Setup Relating to Switcher Processor
80.00%: Set the grid size to 80% of the screen frame
85.00%: Set the grid size to 85% of the screen frame
90.00%: Set the grid size to 90% of the screen frame
100.00%: Set the grid size to the full-screen size (100% of the screen
frame)
When in step 3 you selected [Box1] or [Box2], in the <Box1 Adjust> or
<Box2 Adjust> group, select the screen aspect ratio (16:9/14:9/4:3).
When in step 3 you selected [Grid], in the <Grid Adjust> group, select the
screen aspect ratio (16:9/4:3).
Parameter Adjustment
Line Line phase
Time Time
In the Switcher >Output menu, press [4:3 Crop].
The 4:3 Crop menu appears.
The status area shows the output ports and respective 4:3 Crop mode
settings.
Press [4:3 Crop], turning it on.
This enables the crop setting, and this is reflected in the status area.
Setting values
–90 to +90
–32.00 to +96.00