Color Mix Settings - Sony MVS-8000 User Manual

Selecting the signal or color to be inserted in the wipe crop
border
When you are applying a border or soft border to the wipe crop, you can select
the signal or color to be inserted in the border.
1
2

Color Mix Settings

This function allows you to create a "mix color" signal, combining two
different colors with a pattern from a pattern generator, to be used to fill a
background, border, and so on.
The mix color signal can be used in the border, flex shadow, wipe crop, trail,
wind, and background effects.
For example images, "DME Special Effects" in Chapter 1 (Volume 1).
Note
The color mix function is not supported on the MVE-8000/8000A.
Creating a color combination pattern
To select the pattern
1
2
56
DME Special Effect Operations
In the <Border Fill> group of the Wipe Crop menu, select one of the
following.
Flat Color: flat color
Mix Color: a mix color signal combining color 1 and color 2 (see the next
section, "Color Mix Settings")
Ext Video: an external video signal input to the Ext IN connector
When Flat Color is selected in step 1 only, adjust the following parameters.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
In the DME menu, select VF1 'Edge' and HF7 'Color Mix.'
The Color Mix menu appears.
Press [Mix Pattern Select].
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00