Entering Three-Dimensional Parameter Values - Sony MVS-8000 User Manual

Entering Three-Dimensional Parameter Values

In addition to setting three-dimensional parameter values with the trackball and
Z-ring, you can enter them directly from the numeric keypad control block.

Entering three-dimensional parameter values

1
2
3
20
Three-Dimensional Transformation Operations
Example three-dimensional parameter details
In the device control block, press the [X], [Y], or [Z] button, turning it on.
The numeric keypad control block enters a mode in which you can enter
parameters for the selected axis.
Enter a parameter value with the numeric keypad.
The number of significant digits after a decimal point is 4.
Press the [ENTER] button.
The parameter value is changed, and the image changes.