Sony MVS-8000 User Manual page 414

Knob
1
3
Linking cross-point buttons and GPI output ports
To link cross-point buttons or the [CUT] and [AUTO TRANS] buttons in the
cross-point control block, and GPI output ports, use the following procedure.
1
In the Switcher >Link menu, press [GPI Link], to display the Switcher
>Link >GPI Link menu.
The status area shows the output ports and the link status, and delay value
information.
2
Using any of the following methods, select the GPI output port.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1
3
Press [GPI Link Adjust].
The GPI Link Adjust menu appears.
The status area shows the current setting state of the selected link, and a
list of the selectable video names or button names, together with the GPI
link Enable/Disable setting for each bus.
4
Using any of the following methods, select what the setting applies to. For
each GPI port there can be up to eight links.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter
1
2
3
a) These include main pair numbers 1 to 128, and "Cut" and "Auto Trans" on each bank.
5
In the <Video/Button> group, press [Select].
Parameter Adjustment
Link No Link to which setting applies
Link Table No Link table selection
Adjustment
GPI Port GPI output port selection
Adjustment
GPI Port GPI output port selection
Link No Link number selection
Video/Button No Selection of video or
button name to be linked
Setting values
1 to 64
1 to 8
Setting values
1 to 8
Setting values
1 to 8
1 to 8
a)
1 to 136
Setup Relating to Switcher Processor
413