Importing and Exporting Files
You can import or export frame memory image data from or to external media.
Import: to transfer a file in a different format from hard disk or memory card
Export: to change the file format of register data and save the data on hard disk
To carry out these operations, use the File >All,External File >Import/Export
menu.
For details of the formats supported for import and export, see "Files" in
Chapter 1 (Volume 1).
Displaying the Import/Export Menu
In the File menu, select VF6 'All, External File' and HF2 'Import/Export.'
The list on the left shows the frame memory registers, and the list on the right
shows the content of the external recording media.
Importing Frame Memory Data
As an example, to import data in a bitmap format from a memory card to a
frame memory register, use the following procedure.
About the points you should take note of when importing data, see "Files" in
Chapter 1 (Volume 1).
Note
The imported file is created in the "Default" folder.
1
2
3
482
Importing and Exporting Files
to frame memory as image data.
or memory card.
In the Import/Export menu, press the device selection area on the left to
select [Frame Memory (.BMP)].
Press the device selection section in the list on the left, and press either of
[Still/Clip] and [Ext Clip].
All of the selected type of frame memory data appears.
Press the device selection area on the right to select [Memory Card].
It is not possible to select a directory.