To set the image position in edge crop up-conversion mode
1
2
To return the edge crop image to the center
In the <Edge Crop Position> group, press [Center].
To set the image position in letter box up-conversion mode
1
394
Setup Relating to Switcher Processor
Original image (4:3)
In the <Edge Crop Position> group of the Switcher >Input >FC Adjust
menu, press [Position], turning it on.
Adjust the following parameter.
Knob Parameter
2
EC Position
a) For down-conversion, the value is from –30 to +30 inclusive.
In the <Letter Box Position> group of the Switcher >Input >FC Adjust
menu, press [Position], turning it on.
Up-converted image (16:9)
Edge Crop
Letter Box
Squeeze
Adjustment
Setting format Setting values
a)
Image position
1080
720
–120 to +120
–80 to +80