Sony MVS-8000 User Manual page 451

3
4
5
6
7
450
Setup Relating to DCU
• Turn the knob.
Knob Parameter Adjustment
1 Port No Serial port number
a) The range of setting values depends on the DCU port setting. (When the MKS-2700 is
connected, select 2 for the slot and a value in the range 1 to 6 for the port.)
Press [Port Setting].
The DCU >Serial Port Assign >Extended VTR Setting menu appears.
At the top of the status area, the relevant serial port, slot number, protocol,
serial port name, and SCU number appear. In the lower part of the status
area, the response speed settings appear.
Using any of the following methods, specify the command to which the
response speed setting applies.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Item No Item selection
a) 1.Maximum Open Delay: maximum time required to open a file
2. Maximum Cueup Delay: maximum time required to cue up a file
3. Play After Cueup Delay: maximum delay time from the cued-up state to begin playback
4. Stop Delay: delay time from issuing the stop command until actually stopping
Turn the knob to set the response speed of the Extended VTR.
Knob Parameter Adjustment
2 Setting Response speed setting
Press [Set].
This confirms the setting.
Repeat steps 4 to 6 as required to make the settings for other items.
Setting values
a)
1 and upwards
Setting values
a)
1 to 4
Setting values
0 to 255