Disk Recorder/Extended Vtr File Operations - Sony MVS-8000 User Manual

To execute an action when the [REWIND] button is pressed, it is necessary to
set this action (Rewind Action). To carry out this setting, in the Device >DDR/
VTR >Timeline menu, press [Rewind Action] to recall the Rewind Action
menu. In this setting screen, use the same setting method as in the screen for
setting an action on the VTR/disk recorder timeline.
Alternatively, you can select the reverse arrangement, whereby when the
[REWIND] button is pressed, this executes the action set for the first keyframe,
and when the [RUN] button is pressed the first keyframe action is not executed.
In this case, the Rewind Action setting is still valid.
For details of the setting, see "Setting the first keyframe when a rewind is
executed" (page 375).

Disk Recorder/Extended VTR File Operations

To carry out disk recorder/Extended VTR file operations, use the Device menu.
Refreshing (recalling) the disk recorder/Extended VTR file list
1
2
186
Control of VTRs, Extended VTRs, and Disk Recorders
In the Device menu, press VF3 'DDR/VTR' and HF3 'File List.'
The Device >DDR/VTR > File List menu appears.
In the status area, two lists appear.
The upper list shows the selected device name, and the currently selected
file name (register number), and set file name.
The lower list shows a list of files for the selected device (the device
appearing in the upper list). In this list is shown the file name (register
number) set when the material was recorded, the length of the file data
(timecode value), and the file update information.
Notes
• File update information is not shown when using the video disk
communications protocol.
• When using an Extended VTR, the length of file data and file update
information are not shown, and the register number is shown in place of
the file name.
Select the device for which you want to recall the file list, using the knob.
Knob Parameter Setting
1 Dev Device number
Setting values
1 to 12