Sony MVS-8000 User Manual page 97

2
3
To set the wedge center position
When Wedge is selected in the <Mode> group, you can set the wedge center
position.
1
2
96
DME Special Effect Operations
To make transition settings, press [Transition] and set the following
parameters.
Knob Parameter Adjustment
1 Rotation Number of rotations of the blocks
2 Perspective Degree of randomness in distance
moved by each block
To set the partition method, press [Partition] and set the following
parameters.
• When Bar was selected in step 1
Knob Parameter Adjustment
1 Width Width of partition
2 Offset Degree of randomness in partition
width
3 Angle Starting angle of effect
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
• When Wedge was selected in step 1
Knob Parameter Adjustment
4 No Width of blocks
5 Phase Partition position
Press [Position].
Set the following parameters.
Knob Parameter Adjustment
1 H Horizontal center position
2 V Vertical center position
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
Setting values
–8.000 to +8.000
0.000 to 100.000
Setting values
0.000 to 100.000
a)
–5.000 to +5.000
b)
–20.000 to 20.000
–8.000 to +8.000
Setting values
0.000 to 100.000
–8.000 to +8.000
Setting values
a)
–8.000 to +8.000
b)
–32.000 to +32.000
a)
–6.000 to +6.000
b)
–18.000 to +18.000