Sony MVS-8000 User Manual page 426

Knob
2
– When Re-Entry is selected
Knob
2
6
Press [Set].
In the list on the right of the status area, the selected content is reflected in
the specified DME channel.
Repeat steps 3 to 6 as required.
Selecting the mode for turning off keys upon receiving the editor
command
Selects the mode for turning off keys when an "All Stop" command is received
from the editor.
1
In the Switcher >Device Interface menu, press [Editor I/F].
The Editor I/F menu appears.
2
Select one of the following modes.
All: When an "All Stop" command is received, all keys for the selected
regions are turned off.
Specified: When an "All Stop" command is received, among all the keys
for the selected regions, only the keys specified by the editor are
turned off.
Note
When an "All Stop" command is received in the process of a transition, the
keys selected for the next transition are also turned off.
Parameter Adjustment
Src No AUX bus number
Parameter Adjustment
Src No Reentry number
Setting values
0 to 48
Setting values
0 to 80
Setup Relating to Switcher Processor
425