Selecting the overlay priority for movie and still images (video
freeze image)
In the <Priority> group, select the way in which the images are overlaid.
Over: the movie is on top, and the still image is underneath.
Under: the movie is underneath, and the still image is on top.
Mix: the movie and still images are mixed; adjust the following parameter with
Selecting the freeze timing
In the <KF Freeze Timing> group, select the timing for freezing the keyframe
strobe.
Frame: freeze in frame units.
Field: freeze in field units.
Note
The freeze timing setting is not required when the following signal formats are
being used.
Erasing the afterimages that remain in memory whenever a
keyframe is passed
Press [KF Strobe Eraser], turning it on.
When the effect passes a keyframe, the afterimage is erased before writing a
new afterimage.
Applying stardust to the afterimage portion
The afterimage portion becomes stardust, and gradually disappears.
1
2
122
DME Special Effect Operations
the knob.
Knob
Parameter
Adjustment
1
Mix
Mix amount of the still image with
respect to the movie
a) The 0.00 setting is the same as Over, and the 100.00 is the same as Under.
Signal formats: 1080PsF/30, 1080PsF/29.97, 1080PsF/25, 1080PsF/24,
1080PsF/23.976, 720P/59.94, 720P/50
Press the [DUST] button, turning it on.
Set the following parameters.
Knob
Parameter
Adjustment
1
KF Strobe
Amount of the afterimage
Dust
disappearing as stardust
Setting values
0.00 to 100.00
Setting values
0.00 to 100.00
a)
a)