Sony MVS-8000 User Manual page 211

4
To modify the keyframes in a specified range
1
2
3
4
5
6
Differences in the changes when a number of keyframes are
modified
When you select a number of keyframes to modify, and press the [MOD]
button alone or in combination with the [SHIFT] button, the result of the
operation differs as shown below.
210
Creating and Editing Keyframes
Press the [MOD] button. Alternatively, hold down the [SHIFT] button and
press the [MOD] button.
For the difference in the result, see "Differences in the changes when a
number of keyframes are modified" (page 210).
This makes the modification simultaneously to all keyframes in the effect.
Press the [EDIT ENBL] button, turning it on.
Stop the effect at any keyframe within the range to be modified.
Carry out the necessary modifications.
Press the [FROM TO] button, turning it on.
The display in the numeric keypad control block shows the current
keyframe number, followed by "TO."
Using the numeric keypad in the numeric keypad control block, carry out
the following operations.
• To set the first keyframe in the range to be modified, press the [CLR]
button, then enter the keyframe number, and press the [ENTER] button
to confirm.
• To set the last keyframe in the range to be modified, enter the keyframe
number from the numeric keypad, and press the [ENTER] button to
confirm.
Press the [MOD] button. Alternatively, hold down the [SHIFT] button and
press the [MOD] button.
For the difference in the result, see "Differences in the changes when a
number of keyframes are modified" (page 210).
This makes the modification simultaneously to all keyframes in the
specified keyframe range.