Sony MVS-8000 User Manual page 384

Setting the menu to be shown when the menus are started
1
In the Panel >Maintenance menu, press [Initial Menu Set].
A popup window appears.
2
Enter the page number of the desired menu.
The next time the menus are started, the menu specified by this number
appears.
Note
To enable this setting, the initial state of the control panel when powered on
must be set to one of the following.
• Set to Resume mode
• Set to Custom mode, with "User" selected in the <Setup> group.
For details of these settings, see "Selecting the State After Powering On (Start
Up Menu)" (page 297).
Setup Relating to Operations From the Control Panel
383