Tally Copy Settings (Tally Copy Menu)
For settings relating to the tally copy function, use the Router/Tally >Tally
Copy menu. The settings are common to the parallel and serial tallies.
To display the Tally Copy menu
In the Engineering Setup menu, select VF6 'Router/Tally' and HF5 'Tally
Copy.'
The status area shows the tally copy status.
Making new tally copy settings
1
2
3
4
Modifying tally copy settings
1
458
Setup Relating to Router Interface and Tally
This deletes the selected tally generation entry.
In the Router/Tally >Tally Copy menu, select [New].
The New menu appears.
Turn the knob to select the copy-from source.
When setting more than one tally copy, you can specify the copy-from
source start and end addresses.
Knob
Parameter
1
Copy From (From)
2
Copy From (To)
Specify the copy-to source address.
Knob
Parameter
3
Copy To (From)
4
Copy To (To)
Press [Execute].
This makes the tally copy setting according to the specifications in steps 2
and 3.
In the Router/Tally >Tally Copy menu, press [Modify].
The Modify menu appears.
Adjustment
Copy-from source start address
Copy-from source end address
Adjustment
Copy-to source (start) address
Copy-to source (end) address
Setting values
1 to 1024
1 to 1024
Setting values
1 to 1024
1 to 1024