Copying Files - Sony MVS-8000 User Manual

Copying Files

You can copy files either within a directory or between directories, on the hard
disk, or memory card.
As an example, to copy a snapshot file from memory card to hard disk, use the
following procedure.
1
2
3
4
5
Copying frame memory files
Between steps 3 and 4 of the procedure above, "Copying Files," do as follows.
1
2
472
Operations on Individual Files
In the File menu, select VF3 'Snapshot' and HF1 'Snapshot.'
In the device selection area on the left, specify the location of the file to be
copied (in this case [Memory Card] and a directory). (See page 468.)
In the device selection area on the right, select the destination of the copied
file (in this case [HDD] and a directory).
Using any of the following methods, select the source and destination files.
• To select all files within the list, press [ALL] below the list.
• To select multiple files, turn the knobs to select in the following ranges.
Knob Parameter Adjustment
1 List L Select the first copy source file
2 List R Select the first destination file
3 Num Number to be selected
• To select a single file, press the arrow keys to scroll the reverse video
cursor, or press directly on the list in the status area.
Press [t Copy].
This copies the selected file or files to the specified destination.
If there is already data in the specified location, a confirmation message
appears.
• Select "Yes" to overwrite the data.
• Select "No" to cancel copying all of the files.
To select the frame memory folder, press [Default] in the device selection
in the list on the left.
A pull-down menu appears.
Press the required folder name.
Setting values
1 to 99
1 to 99
1 to 99