3
4
To select an outline only key
Press [Outline], turning it on.
The outline only effect is enabled.
Art Edge Settings
This effect adds edges to the inside and outside of the input picture.
Note
The Art Edge function is not supported on the MVE-8000/8000A.
Applying art edges
1
34
DME Special Effect Operations
This enables key borders, and you can now use the knobs to adjust the
parameters.
Note
The key border function and Glow function (see page 75) cannot be turned
on at the same time. Only the one most recently turned on is effective.
Set the following parameters.
Knob
Parameter
Adjustment
1
H
Simultaneously adjust width of left
and right key borders
2
V
Simultaneously adjust width of top
and bottom key borders
3
All
Simultaneously adjust width of all
four key borders
4
Soft
Softness of the key borders
5
Density
Density of the key borders
To set the key border color, press [Flat Color] and adjust the following
parameters.
Knob
Parameter
Adjustment
1
Luminance
Luminance
2
Saturation
Saturation
3
Hue
Hue
In the DME menu, select VF1 'Edge' and HF4 'Art Edge.'
Setting values
0.00 to 100.00
0.00 to 100.00
Value of H shown
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00