Macro Operations in the Numeric Keypad
Control Block and the Keyframe Control
Block
This section describes macro operations carried out in the numeric keypad
control block and the keyframe control block.
Note
For a macro take operation (see "Macro Execution" under "Macros" in
Chapter 1 (Volume 1)), the numeric keypad control block and keyframe control
block are not used. Use the [Take] button in the Flexi Pad control block.
For an overview of macros, see "Macros" in Chapter 1 (Volume 1).
For macro operations in the numeric keypad control block, use the following
buttons. (See the figure on next page.)
492
Macro Operations in the Numeric Keypad Control Block and the Keyframe Control Block