Blur Settings - Sony MVS-8000 User Manual

.
5
Masking the Defocus effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see "Mask Settings" (page 76).
Note
The Mask function is not supported on the MVE-8000.

Blur Settings

This effect blurs the entire image.
Applying the Blur effect
1
60
DME Special Effect Operations
Knob Parameter Adjustment
3 Key H Horizontal defocusing of key
signal
4 Key V Vertical defocusing of key signal 0.00 to 100.00
• When Video is selected
Knob Parameter Adjustment
1 H Horizontal defocusing of video
signal
2 V Vertical defocusing of video
signal
3 All Horizontal and vertical
defocusing of video signal
• When Key is selected (with SDI-interfaced MVE-8000A/MVE-9000)
Knob Parameter Adjustment
1 H Horizontal defocusing of key
signal
2 V Vertical defocusing of key signal 0.00 to 100.00
3 All Horizontal and vertical
defocusing of key signal
To cancel black level leaking that can occur at the edge of the screen when
the Defocus effect is enabled, press [Clean Defocus], turning it on.
In the DME menu, select VF2 'Video Modify' and HF1 'Defocus/Blur.'
Parameter group [2/2]
Settings values
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
H value shown
Settings values
0.00 to 100.00
H value shown