Sony MVS-8000 User Manual page 558

3
In the <Mask Source> group, select the mask source.
Box: signal from dedicated box generator
Pattern: signal from dedicated pattern generator
4
Depending on the selection in step 3, adjust the following parameters.
• When Box is selected
Knob Parameter
1 Top
2 Left
3 Right
4 Bottom
5 Soft
• When Pattern is selected
Knob Parameter
1 Size
2 Soft
5 Pattern
For the pattern selection, you can also press [Mask Ptn Select] in the
Mask1 Adjust menu, then use the Mask Ptn Select menu.
Press any of the displayed patterns (standard wipe patterns 1 to 24) to
select it, then you can adjust the following parameters.
Knob Parameter
1 Size
2 Soft
5
When selecting the pattern as a mask source, set the pattern modifiers as
required.
• When turning [Position] on and setting the pattern position
Knob Parameter
1 Position H
2 Position V
a) See "Positioner" under "Wipes" in Chapter 1 (Volume 1).
Adjustment
Top position
Left position
Right position
Bottom position
Degree of softness of box
Adjustment
Pattern size
Degree of softness of pattern
edge
Pattern number
Adjustment
Pattern size
Degree of softness of pattern
edge
Adjustment
Horizontal position
Vertical position
Setting values
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
1 to 24
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
a)
–200.00 to +200.00
a)
–200.00 to +200.00
Color Corrector Functions
557