Sony MVS-8000 User Manual page 135

To change the light to a ring shape
Note
If you select Parallel or Whole (see page 130) in the <Spot Mode> group and
shaping is disabled, the Ring parameter cannot be set.
Press [Ring] and set the following parameters.
• SD format
Knob
1
2
3
a) –1.00 is one rotation in the counterclockwise direction and +1.00 is one rotation in the clockwise
Note
There is no Radius setting when Line is selected in the <Spot Mode> group.
• HD format
Knob
1
2
3
a) –1.00 is one rotation in the counterclockwise direction and +1.00 is one rotation in the clockwise
Note
There is no Radius setting when Line is selected in the <Spot Mode> group.
To rotate the ring
1
2
134
DME Special Effect Operations
Knob Parameter
5 Speed
a) –100.00 is four rotations per second in the counterclockwise direction, and +100.00 is four
rotations per second in the clockwise direction. 0.00 stops the rotation.
Parameter Adjustment
Offset Offset from center position (radius)
Radius Radius of ring
Angle Rotation angle of ring
direction.
Parameter Adjustment
Offset Offset from center position (radius)
Radius Radius of ring
Angle Rotation angle of ring
direction.
Press [Ring Speed], turning it on.
The display on knob 3 that was visible when [Ring] was selected changes.
Set the following parameter.
Adjustment
Rotation direction and speed
Setting values
a)
–100.00 to +100.00
Setting values
–6.00 to +6.00
0.00 to 6.00
a)
–8.00 to +8.00
Setting values
–24.00 to +24.00
0.00 to 6.00
a)
–8.00 to +8.00