Beveled Edge Settings - Sony MVS-8000 User Manual

vertically around that axis of symmetry. The order of effect application is
Crop > Invert.
Invert –> Crop: Set an axis of symmetry at the center of the input video, and
invert only the desired area of video horizontally and vertically around that
axis of symmetry. The order of effect application is Invert > Crop.

Beveled Edge Settings

This effect applies a beveled frame appearance to an image.
For sample images, see "DME Special Effects" in Chapter 1 (Volume 1).
Applying a beveled edge
1
In the DME menu, select VF1 'Edge' and HF2 'Beveled Edge.'
The Beveled Edge menu appears.
2
Press [Beveled Edge], turning it on.
This enables the beveled edge, and you can now use the knobs to adjust the
parameters.
Note
When the border is enabled, the edge soft function (see page 28) is not
available.
3
Set the parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
• SD format, 4:3 mode
Knob
1
2
3
• SD format, 16:9 mode
Parameter Adjustment
H Simultaneously adjust width of left
and right edges
V Simultaneously adjust width of top
and bottom edges
All Simultaneously adjust width of all
four edges
Setting values
0.00 to 4.00
0.00 to 3.00
Value of H shown
DME Special Effect Operations
31