Sony MVS-8000 User Manual page 301

Installing software
1
2
3
4
300
Setup for the Whole System
Insert the memory card holding the software into the memory card slot.
In the System >Install/Unit Config menu, press [Install].
The Install menu appears; the status area shows the following information.
Upper list: For each connected device, this shows the device name,
current software version (Current), and the latest version that can be
installed (Install, Title).
OK: Installation already completed.
On: For installation, but not completed.
Error: An error occurred during installation.
Cancel: Installation canceled.
Lower list: For the device selected in the upper list, this shows an
automatically detected list of software that can be installed on the
particular device. Also, software selected as a candidate for
installation in the upper list is marked in the lower list with an bullet.
If you are satisfied with the currently installed version of all items in the
upper list, skip to step 6.
To change the items to be installed, use any of the following methods to
select the relevant device.
• Press directly on the list in the status area.
• Use the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Device Device selection
The display of the lower list changes according to the selected device.
To display all related software
Press [Display All Software], turning it on.
Not just the automatically detected software, but the names of all related
software for the selected device appear.
In the lower list, select the software you want to install.
• Press directly on the list in the status area.
• Use the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Setting values
1 and upwards