Sony MVS-8000 User Manual page 118

Freeze Video: Use freeze images of the input video as source of the trail.
Flat Color: Use a flat color matte as source of the trail. You can set the
following parameters with the knobs.
Knob
1
2
3
Hue Rotate: Use a color matte whose hue varies slightly with each frame for
the trail of the afterimages. You can set the following parameters with the
knobs.
Knob
1
2
3
Mix Color: Insert a mix color signal set in the Color Mix menu (see page 56)
in the afterimage portion.
Ext Video: Insert the external video signal input to the Ext IN connector in the
afterimage portion.
Rainbow: Use a freeze image with the hue changing every frame in the
afterimage portion. The difference from "Hue Rotate" is that many colors
appear simultaneously.
For details of the Rainbow parameters, see the "Hue Rotate" item above.
Erasing the afterimages that remain in memory whenever a
keyframe is passed
Press [Trail Eraser], turning it on.
When the effect passes a keyframe, the afterimage is erased before writing a
new afterimage.
Selecting the freeze timing
In the <Trail Freeze Timing> group, select the timing for freezing a trail.
Frame: freeze in frame units.
Field: freeze in field units.
Note
The freeze timing setting is not required when the following signal formats are
being used.
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Speed Speed at which the hue
changes
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
0.00 to 100.00
–12.00 to +12.00
DME Special Effect Operations
117