To set the shape of the light
1
Press [Shape], turning it on.
2
Set the following parameters.
• SD format
Knob
Parameter
1
Shape Ptn
2
Size
3
Deform
4
Soft
5
Angle
a) For more information about the shape patterns, see "Shape Patterns" (page 574) in the
Appendix.
b) 0 is a round shape, and 100 is the shape itself. Smaller values make the pattern more
rounded.
c) –1.00 is one rotation in the counterclockwise direction. +1.00 is one rotation in the
clockwise direction.
• HD format
Knob
Parameter
1
Shape Ptn
2
Size
3
Deform
4
Soft
5
Angle
a) For more information about the shape patterns, see "Shape Patterns" (page 574) in the
Appendix.
b) 0 is a round shape, and 100 is the shape itself. Smaller values make the pattern more
rounded.
c) –1.00 is one rotation in the counterclockwise direction. +1.00 is one rotation in the
clockwise direction.
To rotate the shape pattern
1
Press [Shape Speed], turning it on.
The display on knob 5 that was visible when [Shape] was selected changes.
2
Set the following parameter.
Adjustment
Shape pattern
Shape size
Amount of shape deformation
Softness of shape pattern
Angle of shape pattern rotation
Adjustment
Shape pattern
Shape size
Amount of shape deformation
Softness of shape pattern
Angle of shape pattern rotation
Setting values
a)
1 to 2
0.00 to 6.00
b)
0.00 to 100.00
0.00 to 100.00
c)
–8.00 to +8.00
Setting values
a)
1 to 2
0.00 to 24.00
b)
0.00 to 100.00
0.00 to 100.00
c)
–8.00 to +8.00
DME Special Effect Operations
133