• 576i: 6 to 22
• 1080i: 7 to 20
• 720P: 7 to 25
To return the values to their defaults, press [Default].
4
To enable the through mode, press [Through Mode], setting it to Enable.
The through mode can be applied to the following outputs.
• Aux 1 to 48 outputs
• Program outputs of the M/E and PGM/PST rows
• Clean outputs of the M/E and PGM/PST rows
Making safe title settings
Note
"Grid" in the following procedure is supported on the MVS-8000G only.
1
In the Switcher >Output menu, press [Safe Title].
The Safe Title menu appears.
The status area shows the output ports and the assigned signals, with the
box 1, box 2, cross, and grid states.
2
To enable the safe title on/off setting made in the Misc menu, press [Safe
Title], turning it on.
3
Carry out either of the following operations.
To display a box: Press [Box1] or [Box2], turning it on.
In this case, carry out the following steps 4 and 5.
To display a cross: Press [Cross], turning it on.
To display a grid: Press [Grid], turning it on (when using the MVS-
8000G).
In this case, carry out the following steps 4 and 5.
4
When you selected [Box1] or [Box2] in step 3, adjust the following
parameters.
Knob
2
3
a) Adjustable for Box2
When in step 3 you selected [Grid], in the <Grid Size> group, select one
of the following.
Parameter
Adjustment
Box Size
Box size
Luminance
Display brightness
Setting values
50.00 to 100.00
0.00 to 100.00
Setup Relating to Switcher Processor
a)
401