Setting the format converter inputs (when using the MVS-8000G)
To select the format converter inputs to be set (inputs 1 to 8 or
inputs 9 to 16)
1
2
3
392
Setup Relating to Switcher Processor
Display the Switcher >Input >FC Adjust menu.
The following figure illustrates the case when FC Input 1-8 are set to up-
conversion, and FC Input 9-16 are set to cross-conversion.
Press [FC Input 1-8] or [FC Input 9-16] as required.
Using any of the following methods, select what the setting applies to.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1
Source No
a) If you pressed [FC Input 9-16] in step 2, the value is from 9 to 16 inclusive.
Button to switch between displaying FC Input 1-8
and FC Input 9-16 (If FC Input 1-8 and FC Input 9-
16 have the same format, this does not appear.)
Adjustment
Setting values
Input selection
1 and upwards
a)