Motion Decay Settings - Sony MVS-8000 User Manual

Notes
• The combine process function is not supported on the MVE-8000/8000A.
• When you change the selection in the <Combine Process> group, the
afterimages which had been added up to then disappear.
• When you do not combine images, the Trail effect only is applied, regardless
of the selection in the <Combine Process> group.
Select one of the following in the <Combine Process> group.
Combine –> Trail: Add the Trail effect after the combine. As the trail
parameters, the data for the channel with the lowest number among the
channels being combined is enabled.
Trail –> Combine: Add the Trail effect before the combine. Trails parameters
can be set independently for each channel.
Combine –> Trail

Motion Decay Settings

When the video image is a moving image, you can blur the motion by creating
motion trails (or afterimages).
For sample images, see "DME Special Effects" in Chapter 1 (Volume 1).
Note
When you turn on motion decay, if the Trail, Keyframe Strobe or Wind effect
is on, it automatically goes off.
Blurring image motion
1
In the DME menu, select VF5 'Light/Trail' and HF3 'Motion Decay.'
Trail –> Combine
DME Special Effect Operations
119