Knob
Parameter
1
Amp A
2
Freq A
3
a)
Offset A
4
b)
Speed A
a) Set when Lock is on.
b) Set when Lock is off.
c) Setting for SD 4:3, SD 16:9
d) Setting for HD 4:3, HD 16:9
• When Shape mode is selected
Knob
Parameter
1
Amp R
2
Freq R
3
a)
Offset R
4
b)
Speed R
5
Shape
Knob
Parameter
1
Aspect
2
Angle
a) Set when Lock is on.
b) Set when Lock is off.
c) Setting for SD 4:3, SD 16:9
d) Setting for HD 4:3, HD 16:9
e) 1 (Circle): Circle
2 (Rectangle): Rectangle
3 (Star): Star
4 (Heart): Heart
To limit the direction in which modulation is applied
By pressing [Plus Only], turning it on, you can limit the direction in which
modulation is applied (the direction in which the image expands) to the plus
direction only.
Parameter group [2/2]
Adjustment
Ripple amplitude along periphery 0.00 to 100.00
Ripple frequency along periphery 0.00 to 100.00
Direction along periphery in
which to offset ripple phase and
amount of movement
Ripple direction along periphery
and speed
Parameter group [1/2]
Adjustment
Ripple amplitude
Ripple frequency
Direction in which to offset ripple
phase and amount of movement
Ripple direction and speed
Ripple shape
Parameter group [2/2]
Adjustment
Ripple aspect ratio
Ripple angle
Setting values
–8.000 to +8.000
–100.00 to +100.00
Setting values
0.00 to 100.00
0.00 to 100.00
c)
–8.000 to +8.000
–32.000 to +32.000
–100.00 to +100.00
e)
1 to 4
Setting values
–100.00 to +100.00
–8.000 to +8.000
DME Special Effect Operations
d)
91