Mask Settings - Sony MVS-8000 User Manual

Note
The Mask function is not supported on the MVE-8000.

Mask Settings

This effect masks part of the picture, so that special effects are applied only
inside a selected pattern.
For a sample illustration and other information, see "Digital Multi Effects
(DME)" in Chapter 1 (Volume 1).
Note
The Mask function is not supported on the MVE-8000.
Applying masks
1
2
3
4
76
DME Special Effect Operations
In the DME menu, select VF2 'Video Modify' and HF7 'Mask.'
The Mask menu appears.
In the <Mask> group, press the button for the group of the effect to which
you want to apply the mask, turning it on.
Effect Gp 1: Posterization, Solarization, Nega, Sepia, Mono, Contrast,
Mosaic, Sketch, Metal
Effect Gp 2: Defocus, Blur, Glow
Note
On the MVE-8000A, Effect Gp 1 and Effect Gp 2 cannot be turned on at
the same time.
Press [Position/Size].
Set the mask source parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
• SD format, 4:3 mode
Knob Parameter Adjustment
1 H Horizontal position
2 V Vertical position
Setting values
–8.00 to +8.00
–6.00 to +6.00