Sony MVS-8000 User Manual page 363

3
4
5
362
Setup Relating to Operations From the Control Panel
In the <Action> group, select the function you want to assign.
Menu Shortcut: Assign a frequently used menu to be recalled (menu
shortcut).
Utility Command: Assign a function enable/disable or similar operation
(utility command).
Macro Recall: Assign a macro register recall.
Shotbox Recall: Assign a shotbox register recall.
Depending on the selection in step 3, make the following settings.
When Menu Shortcut is selected: For the subsequent operations, see the
next item "Assigning a menu shortcut to a memory recall button in the
utility/shotbox control block" (page 365).
When Utility Command is selected: A list of commands appears on the
right of the status area; using any of the following methods, select the
command you want to assign.
• Press directly on the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
3 Command Utility command selection
a) GPI No GPI port number
4
a) When the Command parameter is set to Sw'er GPI Test Fire, Panel GPI Test Fire, DCU
GPI, or Test Fire
When Macro Recall is selected: Turn the knob to select the macro
register you want to assign.
Knob Parameter Adjustment
3 Macro Macro register selection
When Shotbox Recall is selected: Turn the knob to select the shotbox
register you want to assign.
Knob Parameter Adjustment
3 Shotbox Shotbox register selection
Press [Action Set].
This assigns the selected action, which is reflected in the status area.
In the utility/shotbox control block, the assigned button lights orange.
If a shotbox register was assigned, the register name appears.
Setting values
1 and upwards
1 and upwards
Setting values
1 to 99
Setting values
1 to 99