Sony MVS-8000 User Manual page 129

6
7
To select a texture pattern
1
2
3
4
128
DME Special Effect Operations
If you selected Texture in step 4, select the pattern as explained in the next
section "To select a texture pattern."
If you selected Texture in step 4, select the way it is applied in the <Surface
Axis> group.
Move: The texture moves together with the DME image.
Fix: The texture does not move, even if the DME image moves.
For the difference between these application methods, see "Digital Multi
Effects (DME)" in Chapter 1 (Volume 1).
Note
If Non Linear is selected in the <Surface Select> group, Fix is disabled.
Behavior is the same as Move.
In the Spot Lighting menu, press [Texture Ptn Select].
The Texture Ptn Select menu appears.
Two lists appear in the status area. The list on the left displays the number
and name of the currently selected texture. The list on the right is for
selecting a texture.
In the <Texture Pattern> group, press [User] or [Factory] to select the
texture pattern list.
[User]: List of texture patterns created by the user. (See "Adding user
texture patterns" (page 305).
[Factory]: List of texture patterns stored in the system when shipped from
the factory.
Do one of the following to select a texture.
• Press directly on the list on the right of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Texture No Texture
a) When Factory is selected
b) When User is selected. The setting value range depends on the number of texture patterns
installed.
Press [Set].
Setting values
a)
1 to 30
b)
101 and upwards